Hackster’s Handpicked Projects of the Week Jun 2, 2017

This Arduino and XBee-connected camera rig shoots flat 360º round video/footage using only one smartphone camera/recording device.

An open source Python framework, which developers can extend to add Siri voice control to any Raspberry Pi project.

Build your own small autonomous car with Android Things.

A project powered by Intel Edison and RealSense geared to prevent accidents that occur as a result of falling asleep behind the wheel.

Using the IOT2020, create an expandable energy monitoring gateway, with configurable warnings and alarms, covering all the basics.

Fidget spinners are everywhere — one of the challenges is to get the fastest spinning and longest running spinner… build a sensor!

An open source, 3D-printable robotic arm, powered by ROS, with 500g lift capacity.

Build a simple wood LED clock, using modern electronics and traditional wood and metal working techniques.

This project uses the Particle Photon and a relay module to create a six-station sprinkler controller.

With Raspberry Pi Zero W and Prota OS, turn you house into a smart home for just a few bucks!

Integrate a Weigand 26 RFID reader with an IOT2020 for cloud-based door access control and monitoring using Node-RED.

Five years of watch development in one master piece of hardware.

This is a UTC clock that displays UTC and PST time, syncs to the Internet and has APIs for displaying messages or setting brightness.

Turn your Raspberry Pi into a Google Assistant.

Create a LoRaWAN network programmed in Python using Zerynth and connected to The Things Network.

Use a fingerprint sensor module to add biometric security to your Arduino projects.